Concrete Leveling & Lifting in Atlanta, GA

---

Tired of tripping on uneven concrete? Our foam injection lifts and stabilizes slabs in minutes!

🚀 Fast & Non-Invasive – No messy concrete replacement.
💰 Affordable – 50% cheaper than replacing slabs.
🛠️ Long-Lasting – Waterproof & prevents future sinking.

• Sidewalks
• Driveways
• Garage Floors
• Pool Decks
• Patios

Get a Free Concrete Repair Estimate: (404) 989-8578

Most Polyurethane Foam Concrete Lifting, Stabilization and Void Filling projects can be completed quickly and economically with minimal disruption, and one day turnaround and return to service.

Injection holes are strategically drilled into the concrete slab(s) that requires lifting. The equipment is contained in a trailer rig with a long hose capable of reaching direct to the concrete slab location. Polyurethane foam is then injected under the slab filling voids, and raising it to the correct level.

After the injection is completed, the hole is patched with polymer concrete or cement. The concrete slab is repaired and for immediate use. The concrete repair typically takes a 1-2 hours based on the scope of your project. Most jobs can be done in one day.

Polyurethane concrete raising achieves the same results as traditional mudjacking, but with a lightweight material that requires smaller and fewer injection holes.  Also known as foam lifting, polyurethane concrete raising is the latest and greatest concrete repair method available.

Polyurethane foam concrete raising is a cost-effective alternative to replacing concrete. Concrete raising can usually be done for less than half the cost of pouring new concrete. However, the savings may be even greater, since when concrete raising the costs of demolition, removal, and landscaping are eliminated.

Polyurethane foam concrete lifting and stabilization avoid costly tear out and disruptive replacement of the slab. This allows the surrounding area to remain in use or service even during the project with minimal downtime, if any.

Polyurethane typically cures in minutes after injection allowing areas to be fully available in minutes not days.

• Foam Insulation
• Foam Roofing
• Concrete Lifting and Leveling
• Polyurea Protective Coatings
• Simple Application
  Since the foam cures in minutes—most solutions exhibit 90% of full compression strength after 15 minutes—large surface areas can be lifted and returned to service immediately during the application. This allows for swift construction and minimal waste.
• Lower Costs
  The ease of application contributes to less time working, as does the fact that many of our geotechnical foam solutions can be applied by a two-man crew. These factors all translate to fewer paid man hours, and lower overall job costs.
• Exotherm-Free Processing
  Our geotechnical foam solutions are designed to be built up in great lift thickness without scorching or foam splitting. During application, our systems have low exotherm heat transfer, which eliminates additional spray passes and ensures quick construction.
• Moisture-Tolerant and Resistant
  Though our solutions are injected into wet areas, they will maintain their physical characteristics during reaction and expansion. Plus, the high-density, closed-cell nature of geotechnical foam makes them resistant to water penetration